How to build MonotrOndes Part 2
I'm using
3-pin DIN Connectors for connecting the Pitch Controller-module to
Synth+expression-module of the MonotrOndes. I'm only using 2 pins and a
ground point in this connector. You can choose a different type of
connector. Or you can choose to make a non-modular version of
MonotrOndes where everything is in fixed place without connectors and cables. But I
have a point! The left-handed player can put the synth+expression-module on
the right side of the pitch controller-module so he/she can play
expression lever with his/her right hand. It's also nice to have a
possibility to position the modules in a way that suits to your playing
style.
3-pin DIN Connector
Here is an aluminum box that contains the multiturn pot. DIN connector at the top.
Multiturn pot is connected to a pulley.
Here is the wiring inside the aluminum box.
And here is the pitch control wiring inside the Synth+expression-module!
Stay tuned! :)
Waiting on Part 3! Looking forward to building my own!
ReplyDeleteGreat build! How many turns does the multiturn pot have?
ReplyDeleteIt's a 10-turn pot. The ring should be able to travel from lowest to highest pitch. You can trim pitch range so the pot can have different count of turns.
ReplyDelete